Sensors
Outdoor temperature sensor with IP65 housing, featuring NTC 10 sensor element with 10 kΩ resistance at 25°C. Measuring range: -50 to +70°C. Dimensions: 78 x 51 x 104mm. Polycarbonate housing and base, with M16 cable gland. Compatible with Carel, Evco, Eliwell, and AB Industrietechnik.
Differential pressure controller with two setpoints, controls pressure or air volume flow, suitable for EC fans, inverters, or AC fan speed controllers with 0-10 VDC, 0-20 mA, or 0-100% PWM output. Setpoints and settings adjustable via Modbus RTU. Powered by 24 VAC/DC, range 0 to 2,000 Pa.
Multifunctional parking garage gas sensor measuring temperature, humidity, CO, LPG, and light; 24 VDC PoM with Modbus RTU via RJ45; suitable for outdoor and harsh environments with replaceable sensor element and adjustable settings.
Sensors for HVAC systems measure temperature, humidity, CO2, and light. CO2 levels are shown via LEDs. Data is sent through Modbus RTU and analogue outputs (0-10V). Light detection adjusts ventilation based on room occupancy. Operates on 24V DC with adjustable settings via Modbus RTU.
The passive temperature sensor uses a PT500 platinum element with a positive temperature coefficient. As temperatures rise, the resistance increases proportionally. Housed in an IP30-rated plastic enclosure, it connects via screw terminal block and has a resistance of 500 Ω at 0°C. For optimal performance, use shielded cable with grounding on the opposing line side.
Regio RCX smart room controllers have a sleek design and built-in sensors for temperature, humidity, CO2, VOC, and motion. The interface features adjustable LEDs for optimal visibility. Demand-based control ensures comfort and energy efficiency. Easily configurable without programming, the RCX integrates with building management systems via RS485 and supports BACnet, Modbus, and EXOline. Configuration is done through the Regin:GO app or Application Tool.
Outdoor CO2 sensor for HVAC applications with 24 V DC PoM, combining Modbus RTU and power via a single RJ45 connector; measures temperature, humidity, CO2, and light, suitable for harsh environments, with replaceable sensor element and adjustable settings.
Monitoring device for air filter differential pressure, sending automatic notifications via email or SMS when replacement is needed; connects to SenteraWeb via Ethernet or Wi-Fi, with built-in sensor and LED indicators, mountable on panel or wall.
4…20 mA duct transmitter for temperature measurements in air.
CO2 duct sensor with 24 V AC/DC power, measuring temperature, humidity, and CO2, featuring three analogue outputs, Modbus RTU for settings adjustment, and a replaceable self-calibrating sensor element.
EXOcompact Vido is a 230 V AC freely programmable controller especially suitable for heating applications. It provides built-in communication via EXOline, Modbus or BACnet for integration into larger systems. It can be used either as a stand-alone unit or as part of a larger system.
CO2 and temperature transmitter for duct mounting
CO2 and temperature transmitter with display
CO2 and temperature transmitter
CO2 + RH + PT1000, 1000 Ohm (0°C)
CO2 transmitter with relay and display
