Name: SSU40-10-HR-M | Sense Control
Price: 250.00 AUD
Availability: InStock

Description

Specifications for SSU40-10-HR-M
Power Supply	Exchangeable 3 V lithium battery, estimated lifetime 10 years. 24 V or 230 V power pack available as accessory.
Nominal diameter	DN40
Flow, Qp	10 m³/h
Type of measurement	Heating
Communication interface	M-Bus
Length of flow meter	200 mm
Thread on meter body	G2″
Media	Water only

Specifications for Compact ultrasonic energy meters
Protection class	IP65
Ambient humidity (non-condensing)	5…95 % RH
Storage temperature	1…60 °C
Temperature range cooling	0…50 °C
Temperature range heating	15…90 °C
Temperature resolution	0.01 °C
Measurement cycle, temperature	2…60 s
Measurement cycle, flow	2 s
Display	LCD, 8 digits + special characters
Display units	MWh, kW, GJ, m 3 , m 3 /h (kWh, GJ, l , l/h, MW, MMBTU, Gcal), 3 decimal places. The unit for energy consumption can only be set while the energy consumption is ≤ 10 kWh.
Mechanical class	Class M1 (MID: 31.03.2004 annex I)
EMC	Class E1 (MID: 31.03.2004 annex I)
Cable length calculator	85 cm
Cable length temperature sensor	1.5 m (the other temperature sensor is integrated into the flow meter)
Diameter temperature sensor	5 mm
Temperature sensor installation	Direct (see the accessories section) or indirect in a temperature sensor pocket per EN1434
Temperature sensor requirements, heat meter	EU (MID) identification on the temperature sensors
Temperature sensor requirements, cooling meter	National German approval as a temperature sensor for cooling meters. Requirements in other countries may be different
Flow meter mounting position	Horizontal or vertical
Flow meter, point of installation	Return flow (if forward flow installation is needed, the installation position can be changed with the main button)
Flow meter temperature range	15…90 °C
Measuring principle	Ultrasonic, time-of-flight
Accuracy according to MID	Class 2